Fabric Face Masks




My standard sizes are based on these lengths from bridge of the nose to under the chin:

Standard adult is appx 5”

Small adult/Teen is appx 4.5”

Kids ages 7-12 appx 4”

Kids ages 3-6 appx 3.5”

I am happy to make a custom mask based on your specific measurements. 



I use high quality 100% cotton Quilting fabrics with a tight even weave. The nose wire is 20 gauge galvanized steel, curved at the ends for comfortable wear and durability. Fabric ties are cut and sewn in house. Elastic options are 3mm, 6mm and cord elastic. I also have apron tape and ribbons that would be appropriate for mask wearing, so email if you want to talk abut those options. 


Fabric ties are 17-20" long. I leave the ties edges raw and tie a loose knot. If you want to shorten the ties, cut and knot the ends again to prevent fraying.


Elastic is one 28" long loop and tied in one knot. The elastic fits behind your neck and head, holding the mask in place without stressing your ears.  And it is easy enough to switch to loops that slide behind your ears. You don’t need to restring it. Just make one cut in the top middle of the elastic (opposite the current knot) and  untie the current knot, leaving the elastic in place in the side channels. Gather the loose elastic ends on each side of the mask and tie them into new knots at a length comfortable for behind your ears. You can also trim the ends and slide the knot into the channel if the elastic ends get in your way.

Care Instructions: 

After receiving your masks, wash them in hot water and soap/detergent. If you use a machine, place the masks in a lingerie bag or pillowcase to minimize bending the nose wire or tangled ties. Dry flat or machine dry. If you machine dry, you will probably want to iron cotton sections flat. Do not iron elastic. 


If you are making masks, here are two patterns that I can recommend. The pleated style pattern is approved by Dell Medical.








Use tight weave quilt weight cotton fabrics. Kona Cottons is the brand I like most for solids.

Nose wire: I have been using 20 gauge galvanized steel, but people have been using a range of materials. Twist ties, 1mm craft wire, or double layer of pipe cleaner all seem suitable. 

Filtration material: I do not have filtration material and none is included with these masks. If you want to add filtration material to the open pocket you should research options. Filtration materials I have seen recommended are: vacuum bags, furnace filters, any flexible hepa filtration material, coffee filters, non-woven clothing interfacing or another layer of fabric like cut up tshirt material. Depending on the material, it can get really fiddly and frustrating to get the filter to fit. I cursed multiple times. A customer told me that using a chopstick or pencil helped. 


There are wonderful local organizations connecting mask makers with healthcare workers requesting fabric masks. Make A Mask is based in Austin, TX if you want to make and donate masks. 


  • Facebook Clean
  • Pinterest Clean
  • Instagram Clean
  • Twitter Clean

Subscribe for Updates




© 2016 by The Crafty Monkey